Harman Kardon HK 3700 Stereo Receiver with Network Connectivity 220 volt

Description

NOTE: This unit works on 220 volts (European). IT WILL NOT WORK ON 110 VOLTS (USA) without a step-up transformer (110v to 220v 8 amp, not included) and (if necessary) a plug adapter (not included).
*This unit has been opened and fully tested using my own step-up transformer and plug adapter I purchased for less than on Ebay.
This is your chance to own a high-quality receiver from Harmon Kardon, well known by audiophiles everywhere. This high-performance stereo receiver has 170 watts of
power, analog and digital capacity, and networked
connectivity.
Harman Kardon’s reputation for excellence in sound quality and
distortion-free power just moved forward to embrace the best of
both the digital and analog worlds. Discover 170 watts of power in a
stereo receiver dedicated to achieving complete connectivity for all
your devices.
The high-performance Harman Kardon HK 3700 stereo
receiver delivers everything you need to drive any home audio system.
With analog connectivity and digital sources, the HK 3700 delivers
plenty of power and offers a built-in, 192kHz/24-bit DAC. Connect to
your home network via Ethernet to play all your local content over
DLNA® 1.5, or connect a storage device or any Apple™ iOS® device via
USB. And, with built-in FM/AM radio and phono input, the HK 3700
eloquently bridges classic and modern audio. It is a truly powerful
centerpiece for your home audio system – a happy collision of old
school sound requirements and new school needs for complete
connectivity. Enjoy your new entertainment headquarters – the envy
of all who see and hear it.
Features:
Striking Harman Kardon design leverages quality materials in a
2-channel, 170-watt stereo receiver with ultra-low distortion.
High-resolution DAC, featuring a 24-bit/192kHz sampling rate.
Complete connectivity including a phono input, FM/AM radio,
home network DLNA®, vTuner™ Internet radio, iOS® Direct with
built-in DAC (digital-to-analog converter) or audio file play via USB.
The Harman Kardon remote app provides control through iOS® and
Android™ platforms as part of the Harman Kardon ecosystem.
Highlights
• DLNA® network compatible
• Built-in 24bit/192kHz DAC
• Phono input
• vTuner™ (Internet radio) streaming
• Harman Kardon Remote app for compatible iOS®
and Android™ smartphones and tablet
• Front-panel USB port for connection to compatible
Apple® products or USB flash drive
• Ultrawide bandwidth
• A/B speaker selection
• Headphone output
• Subwoofer output
Power
• 85W x 2 into 8 ohms, 20Hz – 20kHz, at <0.07% THD,
with all channels driven simultaneously
• High-current (±30 amps)
• Ultra wide frequency response (@1W) 10Hz – 130kHz
(+0dB/3dB) amplifier design
• Signal-to-noise ratio (IHF-A): 100dB
FM Tuner
• Frequency range: 87.5MHz – 108.0MHz
• Usable sensitivity IHF: 1.3µV/13.2dBf
• Signal-to-noise ratio (mono/stereo): 70dB/68dB
• Distortion (mono/stereo): 0.2%/0.3%
• Stereo separation: 40dB @ 1kHz
• Selectivity (±400kHz): 70dB
AM Tuner Section
• Frequency range: 110V: 520kHz – 1710kHz,
220-240V: 522kHz – 1620kHz
• Signal-to-noise ratio: 38dB
• Usable sensitivity (loop): 500µV
• Distortion (1kHz, 50% mod): 1.0%
• Selectivity (±10kHz): 30dB
What’s in the box
1 Harman Kardon HK 3700 Stereo Receiver
1 Remote control
2 AAA batteries
1 FM radio antenna
1 AM antenna loop 1 6’ (1.8m) region-specific IEC power cord
Quick Start Guide
Specifications
• Power requirement: 120V AC/60Hz or 220-240V AC/50/60Hz
(different models)
• Power consumption: <0.5W (standby); 310W maximum
• Dimensions (H x W x D): 4-3/4" x 17-5/16" x 11-13/16"
(121mm x 440mm x 300mm)